Brewery

View as List Grid

Items 41-60 of 66

per page
Set Descending Direction
  1. P.A.M. Tree
    The P.A.M. Tree assembly groups the necessary fittings for tank pressure regulation together at the end of the vent extension line. The standard tree assembly consists of a pressure gauge, ball valve, and an open TC port. Does not include a P.R.V. Learn More
    As low as $165.00
  2. Oxy Carb Tee Assembly
    The tee assembly is used to inject gas into the product. A hollow capped tube of cintered stainless is welded to a TC ferrule and clamped to a customized TC tee. This assembly includes a special tee, cintered stone, check valve, 3/8" hose barb, clamp and gasket. 304 SS mat. Learn More
  3. Brewmaster Hose
    The Professional Brewmaster's hose features a small bend radius, dairy grade ends assure complete sanitation. Learn More
  4. P.A.M. Spool
    The P.A.M. Spool Assembly groups the necessary fittings together for tank pressure regulation. The standard spool assembly consists of a pressure gauge, ball valve, and an open TC port. Does not include a P.R.V. Learn More
    As low as $152.00
  5. P.R.V. & Vacuum Parts
    The P.R.V. attaches to a 2 in. TC vent or P.A.M. assembly. The valve is easy to take apart and clean. 15 lb. and 25 lb. pressure springs are available. Relief pressure can be adjusted down 5 lb. The valve will open at 0.089 lb. of vacumm. Full stainless steel body construction. Learn More
    As low as $2.95
  6. Replacement Coil - Solenoid Valve
    A brass Solenoid Valve is used to regulate coolant. The strength of brass is needed for the constant valve cycling. Learn More
    As low as $139.50
  7. Sample Valve MNPT
    The sample valve is designed to accommodate a CO2 test meter. Learn More
    As low as $118.50
  8. Check Valve
    A check valve with a ten pound spring is used with carbonation stone assemblies to prevent product back-flow. Check valves are available with male or female pipe thread connections. Learn More
    As low as $87.00
  9. Multi-Position Butterfly Valve
    The multi-position butterfly valve is used in process flow piping where fractional flow control is required. The valve has a stainless steel body with a silicon valve seat. TC connections shown. Other connections and butt-weld ends available on all butterfly valves. 304 SS mat. Learn More
    As low as $378.00
  10. Ball Valves
    The stainless steel ball valve has female threaded pipe connections, and is a "full port" valve (the flow is not restricted). 316 SS mat. Learn More
    As low as $23.25
  11. TC/Gas Fitting Assembly
    The TC x Gas Fitting is used to add a CO2-Nitrogen mix to your serving tank. We can also add a carbonation "stone" to the TC fitting and use the assembly to carbonate your beer. Learn More
    As low as $17.50
  12. TC Tee
    The TC has three TC ferrules for multi-purpose application. Custom branch sizes and butt-weld tees available. 304 SS mat. Learn More
    As low as $26.75
  13. TC Eccentric Reducer
    Eccentric reducers are used for tubing size transitions. The flat side allows complete drainage in horizontal piping. Custom reducers, additional sizes and butt-weld available. 304 SS mat. Learn More
    As low as $122.55
  14. TC Concentric Reducer
    Concentric reducers are used for TC transitions in vertical tubing. Custom reducers, additional sizes and butt-weld available. 304 SS mat. Learn More
    As low as $49.28
  15. Parts for Bottom Cone
    Base mount for fermentation tanks. Learn More
    As low as $15.50
  16. TC Gasket
    The gasket seats between two TC ferrules. Buna is the most common material used for temperature between -22F to +250F. Viton is commonly used for temperature up to 400F Silicone but not for low temperature. Teflon are used for higher temperature applications depending on customer preference. Learn More
    As low as $0.40
  17. DIN Ferrule, Liner
    The DIN ferrule is one side of a three piece DIN connection. Slip the DIN nut on the tubing before welding the ferrule in place. 304 SS mat. Metric sizes available. Learn More
    As low as $13.15
  18. TC 90° Elbow
    The 90° elbow has TC connections on each end. TC elbows allow lines to be broken down for sanitizing. Butt-weld elbows available. 304 SS mat. Learn More
    As low as $20.85
  19. TC 45° Elbow
    The 45° elbow has TC connections on each end. TC elbows allow lines to be broken down for cleaning. Additional sizes and butt-weld elbows available. 304 SS mat. Learn More
    As low as $24.50
  20. TC Cap
    The TC cap is used to seal the end of a tube, fitting or valve which has a TC ferrule. A gasket and clamp attach the cap. 304 SS mat. Learn More
    As low as $4.00
View as List Grid

Items 41-60 of 66

per page
Set Descending Direction