Search results for: '1.5" Tri-Clamp to Female (non-threaded) DIN32 Adapter'
- Related search terms
- 1.5" DIN check valve
- 1.5" triclamp to 2" mnpt
- 1.5" ID
-
Poly TC CapThe clear TC cap attaches to a TC ferrule for viewing. These caps are not designed to be used under pressure. Caution must be used in tightening the clamp as the cap can crack. Learn MoreAs low as $12.00 -
THERMOMETER-DIAL 5IN X 1/2IN MNPT, 9IN STEM, REAR MNT, 0-250 FThermometer face is 5IN. diameter and has a 1/2 in. MNPT threaded connection. 9IN stem. Rear mounted. Temperature range reads from 0 to 250 deg. F Learn More$96.95 -
GASKET-MW ARCHON/BOYER NATURAL RUBBER FOOD GRADE OVAL 14X17 (340x440) RATED TEMP -58*F / +194*FGASKET-MW ARCHON/BOYER NATURAL RUBBER FOOD GRADE OVAL 14X17 (340x440) RATED TEMP -58*F / +194*F Learn More$50.00 -
(1) PRESSURE RELIEF VALVE- E RING SHAE C-10105The P.R.V. attaches to a 2 IN TC vent or P.A.M. assembly. The valve is easy to take apart and clean. 15 lb. and 25 lb. pressure springs are available. Relief pressure can be adjusted down 5 lb. The valve will open at 0.089 lb. of vacumm. Full stainless steel body construction. Learn More$3.49 -
CAP-TC 1.5IN - SG POLYThe clear TC cap attaches to a TC ferrule for viewing. These caps are not designed to be used under pressure. Caution must be used in tightening the clamp as the cap can crack. Learn More$12.00 -
SIGHT GLASS, IN-LINE, 1.5IN (4-BOLT STYLE)SIGHT GLASS, IN-LINE, 1.5IN (4-BOLT STYLE) Learn More$142.40 -
SPRAYBALL-1.5IN X 1.0IN SLIP COLLAR CONNECT 360° 40GPM 25PSI 316L ELECTROPOLISHEDSPRAYBALL-1.5IN X 1.0IN SLIP COLLAR CONNECT 360° 40GPM 25PSI 316L ELECTROPOLISHED Learn More$462.60 -
LENS (ONLY) FOR SIGHT GLASS 1.5IN, POLYSULPHONEThe in-line site glass is used for product viewing. Order does include Replacement lense only. 1.75"wide x 1.75" thick x .125"thick Learn More$26.41 -
In-Line Sight Glass LensThe in-line site glass is used for product viewing. Order does include Replacement lense only. Learn MoreAs low as $26.41 -
SAMPLE VALVE 1.5IN TC CONNECTORThe sample valve is designed to accommodate a CO2 test meter. Learn More$159.20
-
StandpipeFor use in bottom-cone fermentation tanks, includes FDA silicone O-Ring Learn MoreAs low as $30.00 -
STANDPIPE - 1.5IN TCFor use in bottom-cone fermentation tanks, includes FDA silicone O-Ring Learn More$30.00 -
COTTER PIN 2.5INSprayballs are used either for dispersing cleaning solution into a tank, or sparging onto a lauter tun grain bed. The sprayball slips onto tubing with a hairpin clip. 2-1/2 in. sprayballs slip over 1 in. tubing and will clean up to 5 foot diameter vessels. 3-1/2 in. sprayballs slip over 1-1/2 in. tubing and will clean up to 10 foot diameter vessels. Optimum operation: 40 GPM @ 25 PSI. 316 SS mat. Learn More$4.95 -
In-Line Sight Glass GasketThe in-line site glass is used for product viewing. The site glass has a TC ferrule on each end. The clear portion is either Pyrex or glass. One end unscrews to replace lens and gaskets. Learn MoreAs low as $2.50
-
GASKET-SAMPLE VALVE SPACER WHITEGASKET-SAMPLE VALVE SPACER WHITE THREADED SAMPLE VALVE GASKETS ARE FOR THREADED SAMPLE VALVES ONLY. - HEAVY THICKNESS Learn More$0.78
-
GASKET-SAMPLE VALVE SPACER REDGASKET-SAMPLE VALVE SPACER RED THREADED SAMPLE VALVE GASKETS ARE FOR THREADED SAMPLE VALVES ONLY. - STANDARD THICKNESS Learn More$0.88
-
Hot
RUPTURE DISK-2IN TC (110 PSI) 200°F (ASME) SILICONE 316LA rupture disc is a secondary non-mechanical pressure protection system for your tank. The rupture disc fits between 2 in. TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Ask for a cut sheet for more information. RATED 110.00 PSIG @ 200°F TYPE AXIUS SC Learn More$400.00 -
RUPTURE DISC-1 1/2IN TC (130 PSI) 300°F (ASME) SILICONE 316LA rupture disc is a secondary non-mechanical pressure protection system for your tank. The rupture disc fits between 1 1/2IN TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Ask for a cut sheet for more information. RATED 130.0 PSIG @ 300°F Learn More$1,368.00 -
Parts for Lauter TunUHMWPE Plates, Rod Wipers, Seals - Everything you need to maintain your lauter tun Learn MoreAs low as $6.60
