Search results for: 'VALVE-CHECK TC 1 1/2IN''
- Related search terms
- VALVE-CHECK TC 1 1/2IN
- VALVE-CHECK
-
PRESSURE RELIEF VALVE- 30 PSI SPRING SHAE 72899-SPRESSURE RELIEF VALVE- 30 PSI SPRING SHAE 72899-S Learn More$7.90 -
Sample Valve 0.375INThe sample valve is designed to accommodate a CO2 test meter. Learn More$118.50
-
TEE ASSY OXY-CARBSTONE 1 1/2INThe tee assembly is used to inject gas into the product. A hollow capped tube of cintered stainless is welded to a TC ferrule and clamped to a customized TC tee. This assembly includes a special tee, cintered stone, check valve, 3/8" hose barb, clamp and gasket. 304 SS mat. Learn More$524.00 -
P.R.V.The P.R.V. are available for 2IN, 3IN and 4IN TC vent. Full 304 stainless steel body construction. Learn MoreAs low as $312.00 -
PRESSURE RELIEF VALVE, GUTH VENT, 0.9 LB, 3IN TC, (134-0105)The P.R.V. attaches to a 3IN TC vent. Valve relieves pressure as the fluid level rises while filling a tank Valve relieves vacuum as the fluid level drops while emptying a tank Seals under equal pressure Full body 316 stainless steel construction 1/4" FNPT connection for gas inlet, plug is included Vacuum break: , 0.1 PSI Pressure relief: 0.9 PSI Maximum temperature and pressure rating: 3 PSI @ 70°F Maximum flow rate: 500 GPM Learn More$312.00 -
RUPTURE DISC-1 1/2IN TC (130 PSI) 300°F (ASME) SILICONE 316LA rupture disc is a secondary non-mechanical pressure protection system for your tank. The rupture disc fits between 1 1/2IN TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Ask for a cut sheet for more information. RATED 130.0 PSIG @ 300°F Learn More$1,368.00 -
Hot
THERMOMETER-DIAL 3IN X 1/2IN MNPT, 12IN STEM, REAR MNT. 0-250 FThermometer face is 3IN. diameter and has a 1/2 in. MNPT threaded connection. 12IN stem. Rear mounted. Temperature range reads from 0 to 250 deg. F Learn More$73.50 -
Hot
RUPTURE DISK-2IN TC (110 PSI) 200°F (ASME) SILICONE 316LA rupture disc is a secondary non-mechanical pressure protection system for your tank. The rupture disc fits between 2 in. TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Ask for a cut sheet for more information. RATED 110.00 PSIG @ 200°F TYPE AXIUS SC Learn More$400.00 -
BEARING-STEADY 2-1/2IN TWIST LOCK UHMW - FITS STD 3.5IN TRIPODBEARING-STEADY 2-1/2IN TWIST LOCK UHMW - FITS STD 3.5IN TRIPOD. FITS JVNW / ICC NW STEADY BEARINGS ONLY Learn More$240.00 -
BEARING-STEADY 2IN UHMW, TWISTLOCK - FITS STD 3.5IN TRIPODBEARING-STEADY 2IN UHMW, TWISTLOCK - FITS STD 3.5IN TRIPOD. FITS JVNW / ICC NW STEADY BEARINGS ONLY Learn More$240.00 -
BEARING-STEADY 1-1/2IN TWIST LOCK DELRIN - FITS STD 2.5IN TRIPODBEARING-STEADY 1-1/2IN TWIST LOCK DELRIN - FITS STD 2.5IN TRIPOD FITS JVNW / ICC NW STEADY BEARINGS ONLY Learn More$252.76
-
BEARING-STEADY 1-1/2IN TWIST LOCK PTFE/TEFLON - FITS STD 2.5IN TRIPODBEARING-STEADY 1-1/2IN TWIST LOCK PTFE/TEFLON - FITS STD 2.5IN TRIPOD FITS JVNW / ICC NW STEADY BEARINGS ONLY Learn More$215.00 -
BEARING-STEADY 2-1/2IN TWIST LOCK TEFLON/PTFE - FITS STD 3.5IN TRIPODBEARING-STEADY 2-1/2IN TWIST LOCK TEFLON/PTFE - FITS STD 3.5IN TRIPOD FITS JVNW / ICC NW STEADY BEARINGS ONLY Learn More$375.65 -
RUPTURE DISC-2IN TC (25 PSI) 72°F (ASME) 316L EPDMThe rupture disc fits between 2IN TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Replace the disk every 5-6 years depending on the use of the tank to ensure superior performance. Learn More$689.00Out of stock -
In-Line Sight Glass GasketThe in-line site glass is used for product viewing. The site glass has a TC ferrule on each end. The clear portion is either Pyrex or glass. One end unscrews to replace lens and gaskets. Learn MoreAs low as $2.50
-
SAMPLE VALVE 1.5IN TC CONNECTORThe sample valve is designed to accommodate a CO2 test meter. Learn More$159.20
-
In-Line Sight Glass LensThe in-line site glass is used for product viewing. Order does include Replacement lense only. Learn MoreAs low as $26.41 -
LENS (ONLY) FOR SIGHT GLASS 2IN, PYREXThe in-line site glass is used for product viewing. Order includes replacement lense only. 2.5" wide x 4" long x 0.156" thick. Learn More$28.82
