Search results for: 'carbonation stone tri clamp'nvOpzp; AND 1=1 OR (<'">iKO)),'
- Related search terms
- carbonation stone'A=0
- tri-cmanp gasket
- tri-cmanp gasket 6
-
Hot
THERMOMETER-DIAL 3IN X 1/2IN MNPT, 12IN STEM, REAR MNT. 0-250 FThermometer face is 3IN. diameter and has a 1/2 in. MNPT threaded connection. 12IN stem. Rear mounted. Temperature range reads from 0 to 250 deg. F Learn More$73.50 -
Spring (only) 15lb for P.R.VThis spring is for a P.R. Valve. P.R. Valve SKU is SKU707040012 This spring is for a 15LB P.R.V. which attaches to a 2 in. TC vent or P.A.M. assembly. The valve is easy to take apart and clean. Learn More$27.60 -
Gaskets for Sanitary Pressure Outswing ManwayGasket will fit Top Outswing Manways. They are available in Buna, Viton, Silicone and EPDM Learn MoreAs low as $95.00 -
CLEVIS PIN .75 x 2.175Use a clevis pin as part of a clevis fastener. When threaded through the prongs of a tang and secured with a cotter pin, this fastening system allows movement along one axis while restricting it along the other. The clevis pin is used on the following ICC NW manways - 16X22 Shroud / Flushmount. Learn More$41.97 -
KNUCKLE BLOCK ASS'Y-16X22 MANWAY - FITS 4IN SHROUD / FLUSHMOUNT / SHADOWLESSKnuckle Block Assembly - Fits a 16X22 MANWAY, with a 4IN shroud and shadowless (flushmount) in|outswing manway Learn More$295.00 -
Temperature ControllerIs temperature control specifically designed for use in wineries and breweries. Learn MoreAs low as $96.00 -
Parts for 1-Arm Rectangular ManwayParts for 13" x 16" Manway. Heavy-duty 7ga construction. Rectangular Lid. Typically used for the ICC NW Econo-Tote Manway. Learn MoreAs low as $0.51 -
(3) KNUCKLE BLOCK ASSEMBLYSide mount. For 18IN bubble outswing manway and 18x22 and 16x22 oval grainout manway. Will fit 18x22IN and 16x22IN oval grainout manway 18IN bubble manway Learn More$231.89 -
CAP-DIN 80 METRIC-IMPERIAL 304 DIN 11851 UNIONThe DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$39.00 -
CAP-DIN 32 METRIC-IMPERIAL 304 DIN 11851 UNIONThe DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$8.40
-
VALVE-BALL 1.5IN 3PC FULL PORT SOCKET WELD 304 PTFE 1000LBStainless steel one-way ball valves have lockable handles to prevent tampering and are used to control flow in a closed pipe system Learn More$163.21 -
PRESSURE RELIEF VALVE, GUTH VENT, 0.9 LB, 3IN TC, (134-0105)The P.R.V. attaches to a 3IN TC vent. Valve relieves pressure as the fluid level rises while filling a tank Valve relieves vacuum as the fluid level drops while emptying a tank Seals under equal pressure Full body 316 stainless steel construction 1/4" FNPT connection for gas inlet, plug is included Vacuum break: , 0.1 PSI Pressure relief: 0.9 PSI Maximum temperature and pressure rating: 3 PSI @ 70°F Maximum flow rate: 500 GPM Learn More$312.00 -
CAP-DIN 100 METRIC-IMPERIAL (4IN) 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$49.60 -
CAP-DIN 75 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$41.14 -
CAP-DIN 40 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$17.13 -
CAP-DIN 65 METRIC-IMPERIAL 304 DIN 11851 UNIONThe DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$22.00 -
CAP-DIN 25 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$8.65 -
Sani-Spin Sprayball with 1IN Slip JointThe Sani-Spin is used much the same way as a C.I.P. sprayball. The advantage of the Sani-Spin is the force of it’s spinning action and the minimal volume it requires. For example, the optimum operating condition for a C.I.P. sprayball is 40 GPM @ 25 PSI; where as the Sani-Spin requires just 25 GPM @ 30 PSI. Learn More$618.00 -
Butterfly ValvesThe butterfly valve is used in process flow piping where fractional flow control is required. The valve has a stainless steel body with a silicon valve seat. TC connections shown. Other connections and butt-weld ends available on all butterfly valves. 304 SS mat. Learn MoreAs low as $120.92 -
P.A.M. Tree PartsThe P.A.M. Tree assembly groups the necessary fittings for tank pressure regulation together at the end of the vent extension line. The standard tree assembly consists of a pressure gauge, ball valve, and an open TC port. Does not include a P.R.V. Learn MoreAs low as $8.18
