Search results for: 'door plate ass'A=0'
- Related search terms
- door wingnut with brass'A=0
- door wing nut'A=0
- DOOR THREAD
-
GASKET-TC 3IN VITON BLACKThe gasket seats between two TC ferrules. Buna is the most common material used for temperature between -22F to +250F. Viton is commonly used for temperature up to 400F Silicone but not for low temperature. Teflon are used for higher temperature applications depending on customer preference. VITON BLACK 40MP Learn More$5.99 -
Hot
GASKET-TC 2.5IN VITON BLACKTC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. VITON BLACK 40MP Learn More$8.25 -
GASKET-TC 2IN BUNATC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. Learn More$1.08 -
GASKET-TC 1INTC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. Learn More$0.49 -
GASKET-TC 4IN BUNA WHITETC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. BUNA WHITE 40MP Learn More$1.05 -
Hot
GASKET-TC 2.5IN BUNA WHITETC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. BUNA 40MP Learn More$0.28 -
GASKET-TC 2IN BUNATC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. BUNA 40MP Learn More$0.18 -
GASKET-TC 1.5IN BUNA WHITETC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. BUNA WHITE 40MP Learn More$0.24 -
GASKET-TC 1IN BUNA WHITETC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. BUNA WHITE 40MP Learn More$0.50 -
GASKET-TC 4IN PTFETC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. PTFE 40MP Learn More$1.68
-
GASKET-TC 1 1/2IN PTFETC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. PTFE 40MP Learn More$3.24 -
FUJI CONTROLLER PXR4 DIGITALThe Fuji controller receives information from the temperature sensor and sends open/close signals to the Heat Transfer Jacket solenoid valve. It can also operate direct fire Burners/Immersion Heaters/Etc. Learn More$350.00 -
WINGNUT STUD 1/2 INWill fit the following manways: 1-arm rectangular 13 x 16 2 and 3 arm rectangular 16 x 21 top outswing manway 20 & 24 inch Learn More$37.00 -
THERMOMETER-DIAL 3IN X 1/2IN MNPT, 4IN STEM, REAR MNT. 0-250 DEG FThermometer face is 3IN. diameter and has a 1/2 in. MNPT threaded connection. 4IN stem. Rear mounted. Temperature range reads from 0 to 250 deg. F Learn More$33.00 -
SAMPLE VALVE 1.5IN TC CONNECTORThe sample valve is designed to accommodate a CO2 test meter. Learn More$159.20
-
PRESSURE RELIEF VALVE, GUTH VENT, 0.9 LB, 3IN TC, (134-0105)The P.R.V. attaches to a 3IN TC vent. Valve relieves pressure as the fluid level rises while filling a tank Valve relieves vacuum as the fluid level drops while emptying a tank Seals under equal pressure Full body 316 stainless steel construction 1/4" FNPT connection for gas inlet, plug is included Vacuum break: , 0.1 PSI Pressure relief: 0.9 PSI Maximum temperature and pressure rating: 3 PSI @ 70°F Maximum flow rate: 500 GPM Learn More$312.00 -
CAP-DIN 100 METRIC-IMPERIAL (4IN) 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$49.60 -
CAP-DIN 75 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$41.14 -
CAP-DIN 40 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$17.13 -
CAP-DIN 65 METRIC-IMPERIAL 304 DIN 11851 UNIONThe DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$22.00
