The Tri-Clamp (TC) Ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1.125IN necks. Longer and shorter necks are available. 304 SS mat. Learn More
The Tri-Clamp (TC) Ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1.125IN necks. Longer and shorter necks are available. 304 SS mat. Learn More
The Tri-Clamp (TC) Ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1.125IN necks. Longer and shorter necks are available. 304 SS mat. Learn More
The Tri-Clamp (TC) Ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1.125IN necks. Longer and shorter necks are available. 304 SS mat. Learn More
This spring is for a P.R. Valve.
P.R. Valve SKU is SKU707040012
This spring is for a 15LB P.R.V. which attaches to a 2 in. TC vent or P.A.M. assembly. The valve is easy to take apart and clean. Learn More
Top mount inspection manway accommodates right, left, and top hinge locations. Cool-to-touch (outdoors) high impact PVC grip knob. Hygienic dome lid and narrow cross arms allow complete wash-down, no puddles. 360 degree locations. Learn More
Side mount door swings clear of work area. Pressure of liquid inside the tank provides a positive seal. Can be used for 18IN round or 16x22 (Shadowless/Flushmount) manway. Learn More
Use a clevis pin as part of a clevis fastener. When threaded through the prongs of a tang and secured with a cotter pin, this fastening system allows movement along one axis while restricting it along the other. The clevis pin is used on the following ICC NW manways - 16X22 Shroud / Flushmount. Learn More
The in-line site glass is used for product viewing. The site glass has a TC ferrule on each end. The clear portion is either Pyrex or glass. One end unscrews to replace lens and gaskets. Learn More
The hi-low level control is used to regulate wort receiver levels. Commonly used on both the brewpub open wort receiver and the enclosed airless grant. Wetted parts are 316 Stainless Steel. Learn More
The Sani-Spin is used much the same way as a C.I.P. sprayball. The advantage of the Sani-Spin is the force of it’s spinning action and the minimal volume it requires. For example, the optimum operating condition for a C.I.P. sprayball is 40 GPM @ 25 PSI; where as the Sani-Spin requires just 25 GPM @ 30 PSI. Learn More
Parts for 20" or 24" sanityary pressure outswing manway. Manway can be top or side mounted. Door plates are custom-made. Call for price and lead time. Learn More
The P.R.V. attaches to a 2 IN. TC vent or P.A.M. assembly. The valve is easy to take apart and clean. 15 lb. and 25 lb. pressure springs are available. Relief pressure can be adjusted down 5 lb. The valve will open at 0.089 lb. of vacumm. Full stainless steel body construction.
Material: Silicone Learn More