Search results for: 'VALVE-LEVEL GAUGE 1 1/2" TC CONNECTION, K10338LL458'
- Related search terms
- 1/2" DIN check valve
- VALVE-LEVEL GAUGE 1 1/2" TC CONNECTION, K10338LL458'
- VALVE-LEVEL GAUGE 1 1/2" TC CONNECTION, K10338LL458'nvOpzp; AND 1=1 OR (<'">iKO)),
-
GASKET-MW 18IN RND OR 16X22 (HYBRID OR SHROUD) SILICONE BLACK 50 DURO SMOOTHCan be used for 18IN round or 16X22 (Hybrid or Shroud) manway. Learn More$120.00 -
GASKET-MW 18IN RND OR 16X22 SILICONE BLACK 50 DURO RIBBEDSide mount door swings clear of work area. Pressure of liquid inside the tank provides a positive seal. Can be used for 18IN round or 16x22 (Shadowless/Flushmount) manway. Learn More$120.00Out of stock -
CLEVIS PIN .75 x 2.175Use a clevis pin as part of a clevis fastener. When threaded through the prongs of a tang and secured with a cotter pin, this fastening system allows movement along one axis while restricting it along the other. The clevis pin is used on the following ICC NW manways - 16X22 Shroud / Flushmount. Learn More$41.97 -
KNUCKLE BLOCK ASS'Y-16X22 MANWAY - FITS 4IN SHROUD / FLUSHMOUNT / SHADOWLESSKnuckle Block Assembly - Fits a 16X22 MANWAY, with a 4IN shroud and shadowless (flushmount) in|outswing manway Learn More$295.00 -
GASKET-MW DOOR PLATE FULL FACE 16X21 RECT SILICONE BLACK FDAGasket for 16x21IN 2 or 3 arms rectangular manway Learn More$141.00 -
Parts for 18" Bubble (Round) Outswing ManwayParts for 18" Bubble (round) manway. This manway is side mounted and used on atmospheric tanks only Door plates are custom-made. These parts fit our #30804011804 (4IN Collar) and our #30804011806 (6IN Collar) models. Learn MoreAs low as $1.12 -
CROSS ARM ASS'Y-10IN TOP OUTSWING MANWAYDesigned for the flat top 10" manway. Manway designed to not hold pressure. Learn More$164.59 -
WINGNUT FOR 18IN BOTTOM CONE MANWAY 304 (old style)This part can be used for the following manways: BTM CONE MANWAY Learn More$108.89 -
GASKET-DIN 50 METRIC-IMPERIAL EPDM (DIN 11851 UNION)DIN gaskets fit into a threaded DIN ferrule to complete the seal Learn More$3.49 -
GASKET-DIN 75 METRIC-IMPERIAL EPDM (DIN 11851 UNION)DIN gaskets fit into a threaded DIN ferrule to complete the seal Learn More$4.30 -
GASKET-DIN 80 METRIC-IMPERIAL BUNA DIN 11851 UNIONDIN gaskets fit into a threaded DIN ferrule to complete the seal Learn More$1.15
-
GASKET-DIN 65 METRIC-IMPERIAL BUNA(DIN 11851 UNION)DIN gaskets fit into a threaded DIN ferrule to complete the seal Learn More$0.85 -
TEE-BW 304 1IN SHORT POLButt Weld tees are a simplified manifold used to regulate fluid direction. Learn More$9.99 -
CLAMP-TC 304 5IN 13MHM SINGLE PINThe TC clamp is used to clamp two TC ferrules together. A TC gasket is installed between the ferrule for a complete seal. 304 Stainless Steel. Learn More$26.27 -
GASKET-TC 1IN SILICONE 40MPTri-Clamp Gaskets are seals made of FDA materials are designed to fit the grooves of Tri-Clamp Tube fittings used primarily in food processing lines, as well as in the pharmaceutical and biotech industries. Learn More$1.02
-
GASKET-TC 1IN PTFETC gaskets are stocked in variety of materials. The gasket seats between two TC ferrules. Buna is the most common material used. Silicone or Teflon are used for higher temperature applications depending on customer preference. PTFE 40MP Learn More$3.69
-
SPRAYBALL-2.5IN X 1IN- TOP SPRAYSprayballs are used either for dispersing cleaning solution into a tank, or sparging onto a lauter tun grain bed. The sprayball slips onto tubing with a hairpin clip. 2-1/2 in. sprayballs slip over 1 in. tubing and will clean up to 5 foot diameter vessels. 3-1/2 in. sprayballs slip over 1-1/2 in. tubing and will clean up to 10 foot diameter vessels. Optimum operation: 40 GPM @ 25 PSI. 316 SS mat. Learn More$41.00 -
GASKET-MW 18IN SILICONE BLACK FULL FACEFull face gasket for 18" bubble (round) manway. This manway is side mounted. Learn More$172.00 -
GASKET-DIN 40 METRIC-IMPERIAL BUNA (DIN 11851 UNION)DIN gaskets fit into a threaded DIN ferrule to complete the seal Learn More$1.30 -
GASKET-DIN 25 METRIC-IMPERIAL BUNA (DIN 11851 UNION)DIN gaskets fit into a threaded DIN ferrule to complete the seal Learn More$0.53
