Search results for: 'gasket-mw g'a=0''[0]'
- Related search terms
- gasket-mw g'a=0'%' AND 5404=5404 AND 'ysJb%'='ysJb
- gasket-mw g'a=0' AND 7996=(SELECT (CASE WHEN (7996=7996) THEN 7996 ELSE (SELECT 8298 UNION SELECT 7738) END))-- WQTn
- gasket-mw g'a=0'" AND 8910=(SELECT (CASE WHEN (8910=6411) THEN 8910 ELSE (SELECT 6411 UNION SELECT 8762) END))-- sgoi
-
TRI-CLAMP FERRULE 304 2.5IN X 1.125IN LGThe Tri-Clamp (TC) Ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1.125IN necks. Longer and shorter necks are available. 304 SS mat. Learn More$6.75 -
(6) Clevis PinClevis Pin secures cross arm to hinges. It fits 20IN and 24IN Top outswing manway. 1/2IN DIA X 1 7/8IN W/10-32 SCREW END Learn More$23.00 -
FUJI CONTROLLER PXR4 DIGITALThe Fuji controller receives information from the temperature sensor and sends open/close signals to the Heat Transfer Jacket solenoid valve. It can also operate direct fire Burners/Immersion Heaters/Etc. Learn More$350.00 -
WINGNUT STUD 1/2 INWill fit the following manways: 1-arm rectangular 13 x 16 2 and 3 arm rectangular 16 x 21 top outswing manway 20 & 24 inch Learn More$37.00 -
THERMOMETER-DIAL 3IN X 1/2IN MNPT, 4IN STEM, REAR MNT. 0-250 DEG FThermometer face is 3IN. diameter and has a 1/2 in. MNPT threaded connection. 4IN stem. Rear mounted. Temperature range reads from 0 to 250 deg. F Learn More$33.00 -
SAMPLE VALVE 1.5IN TC CONNECTORThe sample valve is designed to accommodate a CO2 test meter. Learn More$159.20
-
NUT-DIN 75 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN nut accompanies the plain DIN ferrule and is tightened with a DIN wrench. The nut serves the same function as a clamp in a TC connection. 304 SS mat. Learn More$29.68 -
NUT-DIN 50 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN nut accompanies the plain DIN ferrule and is tightened with a DIN wrench. The nut serves the same function as a clamp in a TC connection. 304 SS mat. Metric sizes available. Learn More$33.60 -
NUT-DIN 25 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN nut accompanies the plain DIN ferrule and is tightened with a DIN wrench. The nut serves the same function as a clamp in a TC connection. 304 SS mat. Metric sizes available. Learn More$12.30 -
FERRULE-DIN 65 IMPERIAL 2.5IN MALE (THREADED) 304 DIN 11851 UNIONThe DIN threaded ferrule is one side of a three piece DIN connection. The threaded ferrule connects to the female threaded DIN nut. 304 SS mat. Metric sizes available. Learn More$23.80 -
CAP-TC 3IN - SG POLYThe clear TC cap attaches to a TC ferrule for viewing. These caps are not designed to be used under pressure. Caution must be used in tightening the clamp as the cap can crack. Learn More$63.21 -
CAP-TC 2IN - SG POLYThe clear TC cap attaches to a TC ferrule for viewing. These caps are not designed to be used under pressure. Caution must be used in tightening the clamp as the cap can crack. Learn More$16.50 -
CAP-TC 1.5IN - SG POLYThe clear TC cap attaches to a TC ferrule for viewing. These caps are not designed to be used under pressure. Caution must be used in tightening the clamp as the cap can crack. Learn More$12.00 -
TRI-CLAMP FERRULE 304 2IN X 1.125IN LGThe Tri-Clamp (TC) Ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1.125IN necks. Longer and shorter necks are available. 304 SS mat. Learn More$5.00 -
TRI-CLAMP FERRULE 304 1.5IN X 1.125IN LGThe Tri-Clamp (TC) Ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1.125IN necks. Longer and shorter necks are available. 304 SS mat. Learn More$4.50 -
TRI-CLAMP FERRULE 304 1IN X 1.125IN LGThe Tri-Clamp (TC) Ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1.125IN necks. Longer and shorter necks are available. 304 SS mat. Learn More$5.00 -
TRI-CLAMP FERRULE 304 .5IN X 1.125IN LGThe Tri-Clamp (TC) Ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Ferrules have 1.125IN necks. Longer and shorter necks are available. 304 SS mat. Learn More$13.50 -
Spring (only) 15lb for P.R.VThis spring is for a P.R. Valve. P.R. Valve SKU is SKU707040012 This spring is for a 15LB P.R.V. which attaches to a 2 in. TC vent or P.A.M. assembly. The valve is easy to take apart and clean. Learn More$27.60 -
CLEVIS PIN .75 x 2.175Use a clevis pin as part of a clevis fastener. When threaded through the prongs of a tang and secured with a cotter pin, this fastening system allows movement along one axis while restricting it along the other. The clevis pin is used on the following ICC NW manways - 16X22 Shroud / Flushmount. Learn More$41.97
