Search results for: 'compression fitting'
- Related search terms
- compression union
- Fitting
- Compression elbow'nvOpzp; AND 1=1 OR (<'">iKO)),
-
RUPTURE DISC-2IN TC (88.3 PSI) 72°F (ASME) SILICONE 316LA rupture disc is a secondary non-mechanical pressure protection system for your tank. The rupture disc fits between 2 in. TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Ask for a cut sheet for more information. RATED 88.3 PSIG @ 72°F SR-H TYPE Learn More$400.00 -
RUPTURE DISC-2IN TC (25 PSI) 72°F (ASME) 316L EPDMThe rupture disc fits between 2IN TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Replace the disk every 5-6 years depending on the use of the tank to ensure superior performance. Learn More$689.00Out of stock -
TRI-CLAMP (TC) ADAPTER 1.5IN x .5IN MNPTA TC x MNPT will adapt a TRI-CLAMP (TC) ferrule to female pipe fittings. One end is TRI-CLAMP (TC) and the other is male threaded pipe. 304 SS mat. Learn More$15.37 -
KING NIPPLE, 304 SS, .375IN MNPTThe P.A.M. Tree assembly groups the necessary fittings for tank pressure regulation together at the end of the vent extension line. The standard tree assembly consists of a pressure gauge, ball valve, and an open TC port. Does not include a P.R.V. Learn More$8.18 -
CAP-DIN 100 METRIC-IMPERIAL (4IN) 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$49.60 -
CAP-DIN 75 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$41.14 -
CAP-DIN 40 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$17.13 -
CAP-DIN 65 METRIC-IMPERIAL 304 DIN 11851 UNIONThe DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$22.00 -
CAP-DIN 25 METRIC-IMPERIAL 304 (DIN 11851 UNION)The DIN cap is used to seal the end of a tube, fitting, or valve which has a DIN threaded ferrule. A gasket and DIN nut will attach the cap. 304 SS mat. Metric sizes available. Learn More$8.65 -
Tank LightThe tank light is used to illuminate the inside of a vessel while brewing or cleaning. It mounts to a 2 in. TC fitting. A standard 120 volt circuit and a 50 watt bulb are required. Learn MoreAs low as $25.00 -
Temperature SensorTemperature probe used to sense current product temperature. To be used in conjunction with a temperature controller. Sensors have a spring-loaded probe designed to fit a 12 in. tempwell with a 1/2 inch MNPT fitting. Learn MoreAs low as $109.60 -
P.A.M. SpoolThe P.A.M. Spool Assembly groups the necessary fittings together for tank pressure regulation. The standard spool assembly consists of a pressure gauge, ball valve, and an open TC port. Does not include a P.R.V. Learn MoreAs low as $83.25 -
CAP-TC 304 2.5IN 16AMPThe TC cap is used to seal the end of a tube, fitting or valve which has a TC ferrule. A gasket and clamp attach the cap. 304 SS mat. Learn More$3.72 -
CAP-TC 304 2IN 16AMPThe TC cap is used to seal the end of a tube, fitting or valve which has a TC ferrule. A gasket and clamp attach the cap. 304 SS mat. Learn More$14.40 -
CAP-TC 304 .5IN AND .75INThe TC cap is used to seal the end of a tube, fitting or valve which has a TC ferrule. A gasket and clamp attach the cap. 304 SS mat. Learn More$4.00
-
ADAPTER-3IN TC CAP X 1.5IN TC FERRULE (OFFSET) 304TC cap adapters are an economical alternative to an eccentric reducer. This fitting is used to reduce the size in process piping where turbulence and complete drainage of the product is not a concern. 304 SS mat. Learn More$19.99 -
ADAPTER-4IN TC CAP X 2IN TC FERRULE (CENTERED) 304TC adapters are an economical alternative to a concentric reducer. This fitting is used to reduce the size in process piping where turbulence and complete drainage of the product is not a concern. 304 SS mat. Learn More$17.00 -
ADAPTER-4IN TC CAP X 1.5IN TC FERRULE (CENTERED) 304TC adapters are an economical alternative to a concentric reducer. This fitting is used to reduce the size in process piping where turbulence and complete drainage of the product is not a concern. 304 SS mat. Learn More$29.40 -
ADAPTER-2IN TC CAP X 1IN TC FERRULE (CENTERED) 304TC adapters are an economical alternative to a concentric reducer. This fitting is used to reduce the size in process piping where turbulence and complete drainage of the product is not a concern. 304 SS mat. Learn More$27.51 -
ADAPTER-2IN TC CAP X 1.5IN TC FERRULE (CENTERED) 304TC adapters are an economical alternative to a concentric reducer. This fitting is used to reduce the size in process piping where turbulence and complete drainage of the product is not a concern. 304 SS mat. Learn More$13.75
