Search results for: 'manway nut and bolt'
- Related search terms
- manway G/6V250
- manway gaskets silicone
- manway handle and bolt
-
TC Eccentric ReducerEccentric reducers are used for tubing size transitions. The flat side allows complete drainage in horizontal piping. Custom reducers, additional sizes and butt-weld available. 304 SS mat. Learn MoreAs low as $25.25 -
(6) Clevis PinClevis Pin secures cross arm to hinges. It fits 20IN and 24IN Top outswing manway. 1/2IN DIA X 1 7/8IN W/10-32 SCREW END Learn More$23.00
-
WINGNUT STUD 1/2 INWill fit the following manways: 1-arm rectangular 13 x 16 2 and 3 arm rectangular 16 x 21 top outswing manway 20 & 24 inch Learn More$37.00 -
CLEVIS PIN .75 x 2.175Use a clevis pin as part of a clevis fastener. When threaded through the prongs of a tang and secured with a cotter pin, this fastening system allows movement along one axis while restricting it along the other. The clevis pin is used on the following ICC NW manways - 16X22 Shroud / Flushmount. Learn More$41.97 -
FERRULE-DIN 100 IMPERIAL 4.0IN MALE (THREADED) 304 (DIN 11851 UNION)The DIN threaded ferrule is one side of a three piece DIN connection. The threaded ferrule connects to the female threaded DIN nut. 304 SS mat. Metric sizes available. Learn More$73.20
-
FERRULE-DIN 32 IMPERIAL 1.25IN MALE (THREADED) 304 (DIN 11851 UNION)The DIN threaded ferrule is one side of a three piece DIN connection. The threaded ferrule connects to the female threaded DIN nut. 304 SS mat. Metric sizes available. Learn More$12.34
-
FERRULE-DIN 80 METRIC 76MM MALE THREADED 304 DIN 11851 UNIONThe DIN threaded ferrule is one side of a three piece DIN connection. The threaded ferrule connects to the female threaded DIN nut. 304 SS mat. Metric sizes available. Learn More$44.70
-
FERRULE-DIN 20 METRIC 23MM MALE THREADED 304 DIN 11851 UNIONThe DIN threaded ferrule is one side of a three piece DIN connection. The threaded ferrule connects to the female threaded DIN nut. 304 SS mat. Metric sizes available. Learn More$13.80
-
FERRULE-DIN 32 IMPERIAL 1.25IN FEMALE LINER 304 DIN 11851 UNIONThe DIN ferrule is one side of a three piece DIN connection. Slip the DIN nut on the tubing before welding the ferrule in place. 304 SS mat. Learn More$8.95
-
FERRULE-DIN 100 IMPERIAL 4.0IN FEMALE LINER 304 DIN 11851 UNIONThe DIN ferrule is one side of a three piece DIN connection. Slip the DIN nut on the tubing before welding the ferrule in place. 304 SS mat. Learn More$17.60 -
FERRULE-DIN 25 IMPERIAL 1.0IN FEMALE LINER 304 DIN 11851 UNIONThe DIN ferrule is one side of a three piece DIN connection. Slip the DIN nut on the tubing before welding the ferrule in place. 304 SS mat. Learn More$9.25 -
FERRULE-DIN 75 IMPERIAL 3.0IN MALE (THREADED) 304 (DIN 11851 UNION)The DIN threaded ferrule is one side of a three piece DIN connection. The threaded ferrule connects to the female threaded DIN nut. 304 SS mat. Metric sizes available. Learn More$89.00 -
FERRULE-DIN 65 IMPERIAL 2.5IN MALE (THREADED) 304 DIN 11851 UNIONThe DIN threaded ferrule is one side of a three piece DIN connection. The threaded ferrule connects to the female threaded DIN nut. 304 SS mat. Metric sizes available. Learn More$23.80 -
FERRULE-DIN 50 IMPERIAL 2.0IN MALE (THREADED) 304 (DIN 11851 UNION)The DIN threaded ferrule is one side of a three piece DIN connection. The threaded ferrule connects to the female threaded DIN nut. 304 SS mat. Metric sizes available. Learn More$16.40 -
FERRULE-DIN 75 IMPERIAL 3.0IN FEMALE (LINER) 304 (DIN 11851 UNION)The DIN ferrule is one side of a three piece DIN connection. Slip the DIN nut on the tubing before welding the ferrule in place. 304 SS mat. Learn More$22.22 -
FERRULE-DIN 50 IMPERIAL 2.0IN FEMALE (LINER) 304 (DIN 11851 UNION)The DIN ferrule is one side of a three piece DIN connection. Slip the DIN nut on the tubing before welding the ferrule in place. 304 SS mat. Learn More$10.50 -
RUPTURE DISC-2IN TC (60 PSI) 200°F (ASME) PTFE 316LA rupture disc is a secondary non-mechanical pressure protection system for your tank. The rupture disc fits between 2 in. TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Ask for a cut sheet for more information. RATED 60.00 PSIG @ 200°F TYPE SR-H Learn More$400.00 -
SPRAYBALL-2.5IN X 1IN- BOTTOM SPRAY - 316LSprayballs are used either for dispersing cleaning solution into a tank, or sparging onto a lauter tun grain bed. The sprayball slips onto tubing with a hairpin clip. 2-1/2 in. sprayballs slip over 1 in. tubing and will clean up to 5 foot diameter vessels. 3-1/2 in. sprayballs slip over 1-1/2 in. tubing and will clean up to 10 foot diameter vessels. Optimum operation: 40 GPM @ 25 PSI. 316 SS mat. DIA X 1IN DIA SLIP JOINT BOTTOM SPRAY PATTERN 316L Learn More$47.64 -
SPRAYBALL-2.5IN X 1IN- TOP SPRAYSprayballs are used either for dispersing cleaning solution into a tank, or sparging onto a lauter tun grain bed. The sprayball slips onto tubing with a hairpin clip. 2-1/2 in. sprayballs slip over 1 in. tubing and will clean up to 5 foot diameter vessels. 3-1/2 in. sprayballs slip over 1-1/2 in. tubing and will clean up to 10 foot diameter vessels. Optimum operation: 40 GPM @ 25 PSI. 316 SS mat. Learn More$41.00 -
RUPTURE DISC-2IN TC (75 PSI) 75°F (ASME) SILICONE 316LA rupture disc is a secondary non-mechanical pressure protection system for your tank. The rupture disc fits between 2 in. TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Ask for a cut sheet for more information. RATED 75PSIG @ 75°F Learn More$600.00
