Search results for: '1.5 inch sight glass'
- Related search terms
- 1.5" ID
- 1.5 inch gaskets
- Sight Glass 3 1/4"
-
Hot
PRESSURE GAUGE 0-100 PSI 2.5IN DIAL, REAR MOUNT, 1/4IN MNPT CONNThe range of a pressure gauge should be approximately twice the operating pressure of the vessel. Learn More$24.00 -
SPRAYBALL-2.5IN X 1IN- TOP SPRAYSprayballs are used either for dispersing cleaning solution into a tank, or sparging onto a lauter tun grain bed. The sprayball slips onto tubing with a hairpin clip. 2-1/2 in. sprayballs slip over 1 in. tubing and will clean up to 5 foot diameter vessels. 3-1/2 in. sprayballs slip over 1-1/2 in. tubing and will clean up to 10 foot diameter vessels. Optimum operation: 40 GPM @ 25 PSI. 316 SS mat. Learn More$41.00 -
TRI-CLAMP FERRULE 304 1IN TC X 4.5IN LGThe Tri-Clamp (TC) Ferrule is one end of a three part connection. This is the most commonly used type of sanitary process pipe connection. Longer and shorter necks are available. 304 SS mat. Learn More$8.62 -
Pressure GaugeThe range of a pressure gauge should be approximately twice the operating pressure of the vessel. ICC NW stocks 30 lb. Liquid filled gauges with 1/4 in. pipe thread connections. It is important to "burp" gauges periodically. Peel the black rubber stopper at the top of the valve back until pressure is released. Learn MoreAs low as $24.00 -
DIN Ferrule, Threaded EndThe DIN threaded ferrule is one side of a three piece DIN connection. The threaded ferrule connects to the female threaded DIN nut. 304 SS mat. Metric sizes available. Learn MoreAs low as $12.34 -
FERRULE-DIN 65 IMPERIAL 2.5IN MALE (THREADED) 304 DIN 11851 UNIONThe DIN threaded ferrule is one side of a three piece DIN connection. The threaded ferrule connects to the female threaded DIN nut. 304 SS mat. Metric sizes available. Learn More$23.80 -
CLAMP-TC 304 2.5IN 13MHM SINGLE PINThe TC clamp is used to clamp two TC ferrules together. A TC gasket is installed between the ferrule for a complete seal. 304 Stainless Steel. Learn More$4.28 -
CLAMP-TC 304 .5IN & .75IN 13MHM SINGLE PINThe TC clamp is used to clamp two TC ferrules together. A TC gasket is installed between the ferrule for a complete seal. 304 Stainless Steel. Learn More$3.81 -
PIN, COTTER FOR SPRAYBALL-2.5IN DIA X 1IN DIA SLIP JOINTSprayballs are used either for dispersing cleaning solution into a tank, or sparging onto a lauter tun grain bed. The sprayball slips onto tubing with a hairpin clip. 2-1/2 in. sprayballs slip over 1 in. tubing and will clean up to 5 foot diameter vessels. 3-1/2 in. sprayballs slip over 1-1/2 in. tubing and will clean up to 10 foot diameter vessels. Optimum operation: 40 GPM @ 25 PSI. 316 SS mat. Learn More$3.50 -
TC 45° ElbowThe 45° elbow has TC connections on each end. TC elbows allow lines to be broken down for cleaning. Additional sizes and butt-weld elbows available. 304 or 316L SS mat. Learn MoreAs low as $9.42
-
CAP-TC 304 2.5IN 16AMPThe TC cap is used to seal the end of a tube, fitting or valve which has a TC ferrule. A gasket and clamp attach the cap. 304 SS mat. Learn More$3.72
-
Parts for Shrouded Inswing/Outswing ManwayParts for 16" x 22" Shrouded Inswing/Outswing Manway. Side mount door swings clear of work area. Pressure of liquid inside the tank provides a positive seal. Side mount. Available in 304 SS. Call if 316L stainless steel is required. Door plates are custom-made. Call for price and lead time. Learn MoreAs low as $41.97 -
GASKET-FLANGE FF 3IN X .125IN BUNA 150NODGASKET-FLANGE FF 3IN X .125IN BUNA 150NOD Learn More$7.88
-
GASKET-MW ARCHON/BOYER NATURAL RUBBER FOOD GRADE OVAL 14X17 (340x440) RATED TEMP -58*F / +194*FGASKET-MW ARCHON/BOYER NATURAL RUBBER FOOD GRADE OVAL 14X17 (340x440) RATED TEMP -58*F / +194*F Learn More$50.00 -
VALVE-SOLENOID REPLACEMENT COIL 120 V 1IN BRASSA brass Solenoid Valve is used to regulate coolant. The strength of brass is needed for the constant valve cycling. 120V Learn More$90.00 -
REDUCER, ECCENTRIC, 2IN X 1INEccentric reducers are used for tubing size transitions. The flat side allows complete drainage in horizontal piping. Custom reducers, additional sizes and butt-weld available. 304 SS mat. SIZE 2IN X 1IN Learn More$68.99
-
ELBOW-TC 316L 1IN 90°The 90 deg. elbow has TC connections on each end. TC elbows allow lines to be broken down for sanitizing. Butt-weld elbows available. 316 SS mat. Learn More$22.16 -
(1) PRESSURE RELIEF VALVE- E RING SHAE C-10105The P.R.V. attaches to a 2 IN TC vent or P.A.M. assembly. The valve is easy to take apart and clean. 15 lb. and 25 lb. pressure springs are available. Relief pressure can be adjusted down 5 lb. The valve will open at 0.089 lb. of vacumm. Full stainless steel body construction. Learn More$3.49
