Search results for: 'din gasket'
- Related search terms
- gasket-mw g
- gasket-mw g'a=0'%' AND 5404=5404 AND 'ysJb%'='ysJb
- gasket-mw g'a=0')) AND 5890=9671-- RjkZ
-
GASKET-I-LINE 3IN PTFEBuna is the most common material used for temperature between -22F to +250F. Viton is commonly used for temperature up to 400F Silicone but not for low temperature. Teflon are used for higher temperature applications depending on customer preference. Learn More$1.24 -
GASKET-I-LINE 2IN BUNABuna is the most common material used for temperature between -22F to +250F. Viton is commonly used for temperature up to 400F Silicone but not for low temperature. Teflon are used for higher temperature applications depending on customer preference. Learn More$1.45 -
GASKET-MW 18IN RND OR 16X22 (HYBRID OR SHROUD) SILICONE BLACK 50 DURO SMOOTHCan be used for 18IN round or 16X22 (Hybrid or Shroud) manway. Learn More$120.00 -
Level Gauge Valve & PartsThe 3-way level gauge valve will mount to a 1-1/2 IN TC at the base of a ICC NW level gauge system. This valve allows you to isolate the level gauge. 304 SS mat. The sight tube is translucent PFA Teflon. Make sure the tube insert is used at all tubing connections. Learn MoreAs low as $1.50 -
GASKET-MW 18IN RND OR 16X22 SILICONE BLACK 50 DURO RIBBEDSide mount door swings clear of work area. Pressure of liquid inside the tank provides a positive seal. Can be used for 18IN round or 16x22 (Shadowless/Flushmount) manway. Learn More$120.00Out of stock -
Parts for 1-Arm Rectangular ManwayParts for 13" x 16" Manway. Heavy-duty 7ga construction. Rectangular Lid. Typically used for the ICC NW Econo-Tote Manway. Learn MoreAs low as $0.51 -
GASKET-PRV 2IN 60 DUROThe P.R.V. attaches to a 2 IN. TC vent or P.A.M. assembly. The valve is easy to take apart and clean. 15 lb. and 25 lb. pressure springs are available. Relief pressure can be adjusted down 5 lb. The valve will open at 0.089 lb. of vacumm. Full stainless steel body construction. Material: Silicone Learn More$3.95 -
Rupture DiskA rupture disc is a secondary non-mechanical pressure protection system for your tank. The rupture disc fits between 2 in. TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Ask for a cut sheet for more information. Learn MoreAs low as $17.60 -
Solenoid ValveA brass Solenoid Valve is used to regulate coolant. The strength of brass is needed for the constant valve cycling. Learn MoreAs low as $52.81 -
TC ClampThe TC (Tri-Clamp) is used to clamp two TC ferrules together. A TC gasket (sold separately) is installed between the ferrules for a complete seal. 304 stainless steel material. Learn MoreAs low as $3.81 -
TC CapThe TC cap is used to seal the end of a tube, fitting or valve which has a TC ferrule. A gasket and clamp attach the cap. 304 SS mat. Learn MoreAs low as $3.72 -
Temperature PortThe TC cap is used to seal the end of a tube, fitting or valve which has a TC ferrule. A gasket and clamp attach the cap. 304 SS mat. Learn MoreAs low as $3.72 -
VALVE-SOLENOID, 120/60 1.5IN, SST, SEMI-DIRECT ACTING, IP65, VITONVALVE-SOLENOID, 120/60 1.5IN, SST, SEMI-DIRECT ACTING, IP65, VITON S21V-1-1/2-CC-120VAC-DIN Learn More$131.80
-
VALVE-SOLENOID, 120/60 1IN, SST, SEMI-DIRECT ACTING, IP65, VITONVALVE-SOLENOID, 120/60 1IN, SST, SEMI-DIRECT ACTING, IP65, VITON S21V-1-CC-120VAC-DIN Learn More$52.81
-
Oxy Carb Tee AssemblyThe tee assembly is used to inject gas into the product. A hollow capped tube of cintered stainless is welded to a TC ferrule and clamped to a customized TC tee. This assembly includes a special tee, cintered stone, check valve, 3/8" hose barb, clamp and gasket. 304 SS mat. Learn MoreAs low as $524.00 -
RUPTURE DISC-2IN TC (60 PSI) 200°F (ASME) PTFE 316LA rupture disc is a secondary non-mechanical pressure protection system for your tank. The rupture disc fits between 2 in. TC fittings. It does not need a separate gasket. A rupture disc will protect your brewery and your patrons. It is extremely unwise and dangerous to operate a pressure tank without non-mechanical protection from over pressurization. Ask for a cut sheet for more information. RATED 60.00 PSIG @ 200°F TYPE SR-H Learn More$400.00 -
CLAMP-TC 304 5IN 13MHM SINGLE PINThe TC clamp is used to clamp two TC ferrules together. A TC gasket is installed between the ferrule for a complete seal. 304 Stainless Steel. Learn More$26.27 -
CAP-TC 304 5IN 16AMPThe TC cap is used to seal the end of a tube, fitting or valve which has a TC ferrule. A gasket and clamp attach the cap. 304 SS mat. Learn More$32.50
