Fittings & Valves

View as List Grid

Items 61-80 of 91

per page
Set Descending Direction
  1. FLOAT SWITCH-SIDEWALL MOUNT 13.8 BAR FLOTECT L6EPB-B-S-3-A Hot
    FLOAT SWITCH-SIDEWALL MOUNT 13.8 BAR FLOTECT L6EPB-B-S-3-A
    The low level sensor is an on/off float switch. The float should mount at the low level limit of a tank. Most commonly used in a hot liquor tank. Learn More
  2. Hi-Low Level Control
    The hi-low level control is used to regulate wort receiver levels. Commonly used on both the brewpub open wort receiver and the enclosed airless grant. Wetted parts are 316 Stainless Steel. Learn More
    As low as $272.27
  3. Temperature Controller
    Is temperature control specifically designed for use in wineries and breweries. Learn More
    As low as $96.00
  4. Sani-Spin
    The Sani-Spin is used much the same way as a C.I.P. sprayball. The advantage of the Sani-Spin is the force of it’s spinning action and the minimal volume it requires. For example, the optimum operating condition for a C.I.P. sprayball is 40 GPM @ 25 PSI; where as the Sani-Spin requires just 25 GPM @ 30 PSI. Learn More
    As low as $618.00
  5. Parts for 2-Arm or 3-Arm Rectangular Manway
    Parts for 16" x 21" Manway. Heavy-duty 7ga outswing door and wing nuts swing free and clear of opening. Stainless steel wing nut assembly for extra strength with brass-lined wing nuts to prevent galling. Double cross arm for strong seal. Learn More
    As low as $0.51
  6. Parts for 1-Arm Rectangular Manway
    Parts for 13" x 16" Manway. Heavy-duty 7ga construction. Rectangular Lid. Typically used for the ICC NW Econo-Tote Manway. Learn More
    As low as $0.51
  7. Parts for Top Outswing Manway
    Replacement components for JVNW top mount manways in sizes 10", 18", 20", or 24" are available. Please note that manway versions may vary over time. For accurate parts information, kindly get in touch with us. Customized door plates are crafted upon request. Feel free to call for pricing details and lead time. Learn More
    As low as $3.00
  8. Parts for Sanitary Pressure Outswing Manway
    Parts for 20" or 24" sanityary pressure outswing manway. Manway can be top or side mounted. Door plates are custom-made. Call for price and lead time. Learn More
    As low as $3.51
  9. Oxy Carb Tee Assembly
    The tee assembly is used to inject gas into the product. A hollow capped tube of cintered stainless is welded to a TC ferrule and clamped to a customized TC tee. This assembly includes a special tee, cintered stone, check valve, 3/8" hose barb, clamp and gasket. 304 SS mat. Learn More
    As low as $524.00
  10. P.A.M. Spool
    The P.A.M. Spool Assembly groups the necessary fittings together for tank pressure regulation. The standard spool assembly consists of a pressure gauge, ball valve, and an open TC port. Does not include a P.R.V. Learn More
    As low as $83.25
  11. P.R.V. & Vacuum Parts
    Springs, Gaskets etc for P.R.V's Learn More
    As low as $3.36
  12. Replacement Coil - Solenoid Valve
    A brass Solenoid Valve is used to regulate coolant. The strength of brass is needed for the constant valve cycling. Learn More
    As low as $56.70
  13. Sample Valve MNPT
    The sample valve is designed to accommodate a CO2 test meter. Learn More
    As low as $0.78
  14. Check Valve
    A check valve with a ten pound spring is used with carbonation stone assemblies to prevent product back-flow. Check valves are available with male or female pipe thread connections. Learn More
    As low as $138.00
  15. Ball Valves
    The stainless steel ball valve has female threaded pipe connections, and is a "full port" valve (the flow is not restricted). 316 SS mat. Learn More
    As low as $48.75
  16. TC/Gas Fitting Assembly
    The TC x Gas Fitting is used to add a CO2-Nitrogen mix to your serving tank. We can also add a carbonation "stone" to the TC fitting and use the assembly to carbonate your beer. Learn More
    As low as $45.65
  17. TC Tee
    The TC has three TC ferrules for multi-purpose application. Custom branch sizes and butt-weld tees available. 304 SS mat. Learn More
    As low as $27.00
  18. TC Eccentric Reducer
    Eccentric reducers are used for tubing size transitions. The flat side allows complete drainage in horizontal piping. Custom reducers, additional sizes and butt-weld available. 304 SS mat. Learn More
    As low as $25.25
  19. TC Concentric Reducer
    Concentric reducers are used for TC transitions in vertical tubing. Custom reducers, additional sizes and butt-weld available. 304 SS mat. Learn More
    As low as $19.00
  20. Parts for Bottom Cone Manway
    Parts for Bottom Cone manway for fermentation tanks. Learn More
    As low as $0.53
View as List Grid

Items 61-80 of 91

per page
Set Descending Direction